Feeding machine

National Hotline:13905232363

Aerator manufacturers
Your current location : First page >> Products >> Feeding machine

Contact us

Jinhu County Huaneng Electromechanical Co., Ltd.

Company Name: Jinhu County Huaneng Electromechanical Co., Ltd.

Chairman: Jiang Naiwen

Phone: 0517-86998484

          0517-86998585

Mobile: 13905232363

           13915192910

Fax: 0517-86988585

Email: hnjd002@163.com

Website: www.hnjidian.cn

Website:en.hnjidian.cn

Address: No. 198, Shenhua Avenue, Industrial Park, Jinhu County


Stainless steel feeding machine

product properties

  • category:Feeding machine
  • Product number:1568001327
  • Views:0
  • Release date:2019-12-24
  • Description
  • Characteristics
  • Parameters

Stainless steel feeding machine

  

Demonstrated the four aspects including automatic offshore driving mode selection, power source selection, guide bracket selection and feeding method. Finally, the card wire trough contact positioning method was selected as the shrimp boat feeding device's coastal driving method. The DC motor is used as the power source, and the flexible tensioning mechanism is used as the guide bracket. After the program is demonstrated, the working parameters of the equipment during walking are determined: the storage capacity of the silo is: 60kg, the walking speed is 28m / min, and the feeding capacity of the feeding boat is 120kg / h. After the parameters are determined, the overall design scheme is designed, including the walking platform, the control system, and the guiding device. Among them, the walking platform includes a hull, a feeding device, a sliding fork, and the like. Each part contains many small devices, which must be analyzed and calculated step by step, and finally selected. Finally, a 12V24AH lead-acid battery was selected as the power source, and a floating boat of 1.8m × 1.0m × 0.21m was selected as the traveling device. A 200W-12v 2-blade brushed DC motor-driven underwater electric propeller was selected, and a dedicated motor control Device, working voltage 12VDC. The feeding casing is square and has a funnel structure at the lower end. The entire volume is 200L and it can hold 60kg of feed. In the feeding method, in order to increase the stability of the walking platform, a rotary feeder is selected as the feeding mechanism. Then design and calculate the most important part of the sliding fork to ensure that it is in close contact with the track. Then estimate the center of gravity of the entire walking device to ensure the safe and stable operation of the entire device. Finally, the design calculation of the guide device is completed.


The basic structure of the ship-based feeding machine was designed by using solidworks software, and the installation and testing of the entire device were completed. The results show that the center position of the feeding boat has a small offset from the towing rope, and can smoothly and stably follow the planned track. And complete feeding. The driving speed can be maintained at 28m / min. The feeding speed is 2kg / min, which can meet the design requirements.


The prawn feeding device has the advantages of simple structure, convenient installation, low cost, and simple operation. Compared with the existing feeding machine, it is characterized in that it can walk a certain distance along the shore and feed the feed. The device is a mechanical guide mechanism, which runs stably and is not affected by external factors, and solves the disadvantage of manual feeding in shrimp culture. The research of this equipment can solve part of the labor force, thereby further promoting the rapid development of the shrimp breeding industry.


label

Previous:DC Feeder2019-12-24

Recently Viewed:

Location: No. 198, Shenhua Avenue, Jinhu County Industrial Park

Phone: 13905232363         Contact: Jiang Naiwen


Copyright (C) Jinhu County Huaneng Electromechanical Co., Ltd.   | 苏ICP备19052743号
ES | Sitemap