Feeding machine

National Hotline:13905232363

Aerator manufacturers
Your current location : First page >> Products >> Feeding machine

Contact us

Jinhu County Huaneng Electromechanical Co., Ltd.

Company Name: Jinhu County Huaneng Electromechanical Co., Ltd.

Chairman: Jiang Naiwen

Phone: 0517-86998484

          0517-86998585

Mobile: 13905232363

           13915192910

Fax: 0517-86988585

Email: hnjd002@163.com

Website: www.hnjidian.cn

Website:en.hnjidian.cn

Address: No. 198, Shenhua Avenue, Industrial Park, Jinhu County


Galvanized sheet of positive pressure air feeding feeder

product properties

  • category:Feeding machine
  • Product number:1567492161
  • Views:0
  • Release date:2019-12-24
  • Description
  • Characteristics
  • Parameters

Galvanized sheet of positive pressure air feeding feeder


Safety precautions for fish pond feeder


1. The fish has a 380V three-phase AC motor for the water throwing device of the air feeding feeder; the 24V DC motor is used for the feeding device in the chassis. The control box is externally connected to a 380V three-phase power supply. The wiring position of the water-throwing motor has been marked on the wiring bar. It must be installed and installed by a professional electrician in accordance with the safe operating procedures to ensure the safety of electricity.


2. Turn off the main power supply in the electrical box during thunderstorms to prevent injuries caused by lightning strikes.


3. In order to ensure the normal operation of the feeder and the safety of the users, the power supply connected must be equipped with circuit protection devices for leakage, phase loss, short circuit, and undervoltage. The wiring must be firm and beware of leakage. The ground wire must be safe and reliable to prevent the motor from burning out due to undervoltage, phase loss, line damage and other reasons.


4. The equipment should be operated by professionals according to the installation drawings in the manual. The connection of all parts of the equipment should be firm; the air inlet and outlet ducts should be unblocked, and the connection ports should be sealed to prevent air leakage; the chassis should be fixed at a suitable location offshore.


5. After the user receives the feeder, the installation is very simple. Since more than 90% of the internal wiring and overall accessories of the chassis have been installed, some of the water parts brackets and floats need to be assembled by the customer, and connected with the self-configured 380V national standard three-phase cable The chassis power switch and water motor can be installed.


6. Do not touch the electrical appliances and rotating parts when starting the machine (persons need to be 20 meters away from the throwing device to prevent injury to people when the feed is thrown out); do not enter the cabinet or use the stick to cut the feeding opening. When stopping maintenance, the main power must be turned off to prevent electric shock or mechanical injury.


label

Next:Automatic feeding machine2019-12-24

Recently Viewed:

Location: No. 198, Shenhua Avenue, Jinhu County Industrial Park

Phone: 13905232363         Contact: Jiang Naiwen


Copyright (C) Jinhu County Huaneng Electromechanical Co., Ltd.   | 苏ICP备19052743号
ES | Sitemap